EIS Testing Key for Checking 1996-2015 Mercedes Benz EIS EZS

$59.99

EIS Testing Key for Checking working status of 1996-2015 Mercedes Benz EIS EZS electronic ignition switch. with this key, you can check if the EIS/EZS is working or not by indicator light signal.

SKU: D3024 Category:

Description

EIS Testing Key for Checking 1996-2015 Mercedes Benz EIS EZS

EIS/EZS is the electronic ignition switch of Mercedes Benz. It’s the one of the parts easy damaged. with this key, you can check if the EIS/EZS is working or not by indicator light signal.

How EIS Testing Key works?

It’s simple to use. just insert the key into EIS/EZS, if the indicator light flashing for 3-6 seconds that means EIS/EZS working well. If no indicator light flashing, that means there’s some problem with EIS/EZS or electronic problem in your vehicle. in this case, Replace the Motorola CPU chip of the EIS cause it was unstable or aging.

无自动替代文字可用。

Mercedes EZS EIS Ignition Switch Problem, Cause, Solution

A problem that Mercedes-Benz owners may face is the key no longer turns in the ignition. This issue is often caused either by a defective key, bad shifter module, a failed Electronic Ignition Switch (EIS) also known as the EIS-EZS or a bad steering lock module (ESL). This problem can affect various Mercedes-Benz models including E-Class, S-Class, C-Class, CLK-Class, ML-Class, SL-Class, etc.

Possible Symptoms

Possible symptoms of a failed Mercedes-Benz include:

  • Key does not turn in the ignition due to failed EIS
  • Key doesn’t turn during cold weather
  • Key may turn, but the instrument cluster lights don’t turn on
  • Unable To Turn The Key, Unable To Start The Car
  • Can turn the key but car won’t start
  • Mercedes key intermittently works
  • Push start button no longer works

Common causes

Mercedes-Benz ignition switch (often referred as immobilizer module) can become faulty and in some cases due to user error. For example, some common reasons why the ignition module failed are:

  • Low battery voltage
  • Power surge due
  • Connecting jump starting cables while key is in the ignition.

During any of the above scenarios, the EIS-EZS may lose its memory. While it can be diagnosed with Start Diagnostic Scanner used at dealerships, it can’t be repaired with this scanner. Mercedes dealers don’t repairer a bad EIS-EZS module. They will recommend that the module be replaced. That’s not necessarily the only solution, see alternatives below.

How to fix Mercedes Ignition Switch Problems

Step 1

These symptoms can very well be caused by a defective key.  If you have a spare key try to see if you are experiencing the same symptoms with the other key. If the other key works, keep using it for a couple of weeks to verify that the issue is really the key and not the EIS.

Step 2

Try scanning your Mercedes-Benz for fault codes. Ideally using a Start Diagnostic Scanner. This scanner should still retrieve fault codes when the ignition is off. If you don’t have this scanner or know of a shop that does, a possible alternative would be to use iCarsoft MB II scanner. The only issue here is that if you can’t turn on the ignition, you can’t power on the OBD2 port and the iCarsoft MB II scanner. If the ignition turns on intermittently, consider yourself lucky and scan for codes. Hopefully, there are fault codes that will point you to the problem.

Step 3

Diagnosing Mercedes ignition problems isn’t a simple DIY job. You may consider taking your car to the dealer or an independent shop and have them troubleshoot the problem. If they come to the conclusion that the Ignition Switch (EIS-EZS) is the culprit you will be told that the switch will need to be replaced. This is an expensive repair that can cost several hundred dollars. You have a few options here. Have the dealer install a new ignition switch, and they will program it to match the VIN of your Mercedes-Benz. Many owners go the route of installing ignition switch, ECU, shifter module and other parts from a donor vehicle. You can’t replace the ignition switch only with one from a used Mercedes-Benz. Several parts need to swapped because the stored VIN needs to be the same in all of them.

There is also a third option, and it may be the cheapest way to fix Mercedes ignition switch module. There are companies that can repair Mercedes-Benz ignition modules. You will need to remove the ignition module from your Mercedes-Benz and ship it one of these companies that can test and repair the EIS-EZS. Once the module is repaired it is returned to you. Besides the fact that this is a lot cheaper than installing a new ignition module, it also doesn’t require any programming or coding. The VIN stored in the Ignition Module (EIS-EZS) matches that of the car; it’s your old module after all. Just install it and you are ready to go.

Additional information

Weight 50 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.